- Coater
- High-efficient Sugar Coating/Film Coating Machine
- Changeable Coating Machine(I, II)
- Integrated coating machine
- Centrifugal Granulating Coating Machine
- Model ZTG Series Automatic Syrup Distribution Tank
- Granulating
- Model JHZ-D Series High-efficient Wet-process Granulator
- Model JFL Series High-efficient Boiling Granulator
- Model JFG-C Series High-efficient Boiling Drying Machine
- Model JHZ-K Series Lab Wet-process Granulator
- Model JYK Series Oscillating Granulator
- Model JFZ/B Series Grinding Granulator
- Model JZL Series Door Type Granulator
- Mixer
- 3-eccentricity Mixing Machine
- Single-arm multi-directional motion mixer
- Sterile mixing
- Model JHSD Series Laboratory Hopper Mixing Machine
- Model JHGD Series Fixed Square-taper Mixing Machine
- Model JHZD Series Auto-lift Hopper Mixer
- 3D Motion Mixing Machine
- Model JHTD Series Column Type Hopper Mixer
- Conversion operation
- Model JNTFZ Series Fixed Feeder & Granulator
- Model JNTF Series Fixed Lifting Feeder
- JZLT Series Lifting Granulator
- Model JNTD Series Hopper Charging Elevator
- Model JYT Series Movable Feeder
- Model JNTC Series Interlayer Elevator
- Conversion operation
- Model JGF-B Series High-efficient Grinder
- Model JGF-C Series High-efficient Grinder
Purpose
Principle of operation
Principle diagram
Main technical paramerers
Send Inquiry
Related Products
Model JHZ-K Series Lab Wet-process Granulator
Dedicated equipment used for the wet mixing granulating of powder, starch, adhesives and cream in food, pharmacy and chemistry industries
JHZ-K series Laboratory wet type granulator is dedicated equipment used for the wet mixing granulating of powder, starch, adhesives and cream in food, pharmacy and chemistry industries. It is also applicable for the mixing and granulating of powder materials. The surface and areas contacting the materials of the equipment are made of fine SUS 304. It is equipped with three barrels, providing wide usage and convenience for assembling and disassembling. It completely conforms to the requirements of GMP of pharmacy industry.
Trough the adequate stirring from the bottom and the spraying of adhesives (or cream) by pressure, the materials in the cone container will be mixed into a moist and soft state. With the cutting of the high-speed parting tool on the side, the materials turn into uniform granules. The requirements of different granules can be met.
?The main barrel: The tangential structure between the cylinder and the cone is adopted, which is good for stirring materials. The angle between the stirring paddle and the cutting tool is rationally designed, which ensures the optimized effect of mixing and granulating.
?The cutting tool is installed aslant to the straight wall of the barrel, which increases the contacting area between the parting tool and the materials and improves the uniformity of the granules. Besides, the aslant installation of the parting tool can prevent the materials from being sprayed to the cover of the barrel, avoiding the old problem of the traditional cutting. ?The efficiency of every new batch is 4 to 5 times higher than that of the traditional technique.
?The whole granulating process of dry mixing and wet mixing is completed in a same airtight container, saving 25% of adhesives and some drying time when compared to the traditional one.
?Operation controlling system: It is controlled by a computer with a touch screen, providing storage space for technical data of several processes. The cutting tool adopts frequency speed, allowing free adjustment on its revolving speed, which meets the requirements of different granulating.
?The cutting tool is installed aslant to the straight wall of the barrel, which increases the contacting area between the parting tool and the materials and improves the uniformity of the granules. Besides, the aslant installation of the parting tool can prevent the materials from being sprayed to the cover of the barrel, avoiding the old problem of the traditional cutting. ?The efficiency of every new batch is 4 to 5 times higher than that of the traditional technique.
?The whole granulating process of dry mixing and wet mixing is completed in a same airtight container, saving 25% of adhesives and some drying time when compared to the traditional one.
?Operation controlling system: It is controlled by a computer with a touch screen, providing storage space for technical data of several processes. The cutting tool adopts frequency speed, allowing free adjustment on its revolving speed, which meets the requirements of different granulating.
Please feel free to contact with us at jp@cnjianpai.com or filling up an enquiry form instructed at the bottom, You will get an effective response within 24 hours from Shengyuan sales representative. Thanks for your valued time with interest!
